Publicité
Les langues disponibles
Les langues disponibles
Wireless-G Broadband Router with RangeBooster
The Administration Tab - Log
The Router can keep logs of all traffic for your Internet connection.
Log
To disable the Log function, keep the default setting, Disabled. To monitor traffic between the network and the
Internet, select Enabled.
Logviewer IP Address. For a permanent record of the Router's activity logs, Logviewer software must be used.
Figure 5-40: Administration Tab - Log
This software can be downloaded from the Linksys website, www.linksys.com/international. The Log viewer
saves all incoming and outgoing activity in a permanent file on your PC's hard drive. In the Logviewer IP Address
field, enter the fixed IP address of the PC running the Log viewer software. The Router will now send updated logs
to that PC.
View Log. When you wish to view the logs, click View Log. A new screen will appear. Select Incoming Log,
Outgoing Log, Security Log, or DHCP Client Log. from the Type drop-down menu. The Incoming Log will display
a temporary log of the Source IP Addresses and Port Numbers for the incoming Internet traffic. The Outgoing Log
will display a temporary log of the Source IP Addresses, Destination IP Address and Port Numbers for the
outgoing Internet traffic. The Security log will display the login information for the Web Utility. The DHCP Client
Log will display the LAN DHCP server status information.
Click the Save the Log button to save this information to a file on your PC's hard drive. Click the Refresh button
to update the log. Click the Clear button to clear all the information that is displayed.
Figure 5-41: Administration Tab - Incoming Log
Change these settings as described here and click the Save Settings button to apply your changes or Cancel
Changes to cancel your changes.
Chapter 6: Configuring the Wireless-G Broadband Router with RangeBooster
33
The Administration Tab - Log
Publicité
Chapitres
Dépannage
