The Wireless Tab - Basic Wireless Settings; Figure 5-19: Wireless Tab - Basic Wireless Settings - Cisco Systems Linksys WRT54GR Mode D'emploi

Wireless-G Broadband Router with RangeBooster

The Wireless Tab - Basic Wireless Settings

The basic settings for wireless networking are set on this screen.
Wireless. Select Enabled to enable wireless capabilities or Disabled to disable wireless.
Network Mode. From this drop-down menu, you can select the wireless standards running on your network. If
you have both 802.11g and 802.11b devices in your network, keep the default setting, Mixed. If you have only
802.11g devices, select Wireless G-Only. If you have only 802.11b devices, select Wireless B-Only. If you do not
have any 802.11g and 802.11b devices in your network, select Disable.
Wireless Network Name (SSID). The SSID is the network name shared among all devices in a wireless network.

Figure 5-19: Wireless Tab - Basic Wireless Settings

The SSID must be identical for all devices in the wireless network. It is case-sensitive and must not exceed 32
characters (use any of the characters on the keyboard). Make sure this setting is the same for all devices in your
wireless network. For added security, you should change the default SSID (linksys) to a unique name.
Channel. Select the appropriate channel from the list provided to correspond with your network settings. All
devices in your wireless network must be broadcast on the same channel in order to function correctly.
SSID Broadcast. When wireless clients survey the local area for wireless networks to associate with, they will
detect the SSID broadcast by the Router. To broadcast the Router's SSID, keep the default setting, Enable. If you
do not want to broadcast the Router's SSID, then select Disable.
Change these settings as described here and click the Save Settings button to apply your changes or Cancel
Changes to cancel your changes.
Chapter 6: Configuring the Wireless-G Broadband Router with RangeBooster 18
The Wireless Tab - Basic Wireless Settings