Distance To Combustible Material; Removing The Insert From The Pallet; Operational Control; Self Closing Door - Nordpeis Q-34UL Manuel D'installation

3. Distance to combustible material

Firewall
When connecting a steel chimney to the top outlet use
a combustible foor, a steel plate of at least 0.7mm
material, such as linoleum, carpets etc. must be
The insert expands when in use, and for this
reason the surround must NEVER rest on the
insert must neither rest on the bench plate
Before the insert is removed from the pallet, remove the
accessories in the combustion chamber. To acess the
door FIG 3B
3. Remove alle loose accessories from the combustion
chamber. Use the list of contents to make sure all parts
are included. Before lifting the product of the pallet,
In order to remove it from the rails and pallet, loosen
removed from the legs FIG 2.

Operational control

When the insert is in an upright position, and prior to
functions are easy to use and appear satisfactory.
3. Make sure the door can be opened and closed
properly.
, check that all
A
FIG 4(B)
enclosed instead - see FIG 4 (C-E).
removed.
5. Carefully push the clamps back in place FIG 4(F).
If it becomes necessary to clean the glass depends on
to keep it in place and open the door. After cleaning the
Radiation shields, rear and around smoke collar.
To utilize the rear or side connection, remove the cut in
the radiation shield. To keep the smoke collar radiation
illustrations.
separate instruction - see FIG 14 - FIG 15.
GB
B
Fully to the right
19