Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OPERATION
WARNING
When working with a blade there is always a risk of kickback if the cutting head comes into contact with
NOTE: The blade is supplied with a cover surrounding the edge of the blade. For your safety, and to
protect the blade, the cover should be installed whenever the cutter is not in use.
mm (0.236 in.).
hand on the assist loop handle. Ensure the cutter sits with a gap between the product and your right
side.
maximum operating height is 30 cm (11.81 in.). Never hold the cutting head higher than 30 cm (11.81
34).
your balance.
(11.81 in.)
26
Fig. 34
Publicité
Chapitres
Table des Matières
Dépannage
