Machine Functional Parts; The Saw Bow; The Machine Base; The Material Stop - Jet Elite EHB-350DGSVIP Mode D'emploi

6.0 Machine Functional Parts

6.1 The Saw Bow

The saw bow is a collection of machine parts consisting of a
saw arm, drive members (motor, gearbox, blade wheel), blade
tension system, blade
The EHB-350DGSVIP model also includes a hydraulic cylinder
and adjustable counter-balance spring.
Figure 6-1: Saw Bow

6.2 The Machine Base

The machine base houses the hydraulic unit and it supports
the coolant tank.
Figure 6-2: Machine Base
6.3 Material Stop
The material stop (Fig. 6-4) is used for series production.
Figure 6-4: Material Stop
guides, and blade guards.

6.4 The Mobile Blade Guide

The mobile blade guide must be set as close as possible to the
stock material, without interfering the cut.
Figure 6-5: Mobile Blade Guide
- Disconnect the machine from the power source.
- Loosen the lock knob (N, Fig 6-4)
- Grab by the handle (M) to adjust.
- Tighten lock knob.
- Reconnect the machine to power source.

7.0 Machining Operation

7.1 Machine Controls

Figure 7-1: Machine Controls
A. Main Power Switch.
B. Water Pump Switch.
C. Power lamp.
D. Manual / Automatic Mode Switch.
E. Hydraulic Pump Start Switch.
F. Cycle Start Button.
G. Stop Switch.
13