Changing Air Direction; Normal Sounds - Whirlpool ACU088PP0 Guide D'utilisation Et D'entretien

To turn the air conditioner on or off:
Press POWER.
To raise the temperature:
Press the TEMP plus pad to raise the temperature 1º until it
reaches 88ºF (31ºC).
To lower the temperature:
Press the TEMP minus pad to lower the temperature 1º until it
reaches 66ºF (19ºC).
To select the mode:
Press MODE.
NOTE: Mode works the same as the air conditioner touch pad
control.
To select the fan speed:
Press FAN SPEED.
NOTE: Fan Speed works the same as the air conditioner touch
pad control.
To set Timer for a 1- to 24-hour delay before air conditioner
turns on (air conditioner must be Off):
1. Press TIMER.
2. Press the plus or minus pad to change the delay time from
1 to 24 hours.
10
To set Timer for a 1- to 24-hour delay before air conditioner
turns off (air conditioner must be On):
1. Press TIMER.
2. Press the plus or minus pad to change delay time from 1 to
24 hours.

Changing Air Direction

Use the tabs to direct the air up, down, right, left or straight
ahead.
A
B
A. Right or left directional tabs
B. Up or down directional tabs

Normal Sounds

When your air conditioner is operating normally, you may hear
sounds such as:
Droplets of water hitting the condenser, causing a pinging or
clicking sound. The water droplets help cool the condenser.
Air movement from the fan.
Clicks from the thermostat cycle.
Vibrations or noise due to poor wall or window construction.
A high-pitched hum or pulsating noise caused by the modern
high-efficiency compressor cycling on and off.
B