Changing Air Direction - Whirlpool 1187617 Guide D'utilisation Et D'entretien

To set the Timer delay for a 1- to 24-hour delay until the air
conditioner turns off (air conditioner must be On):
1. Press TIMER. Indicator light will remain on.
2. Press the plus or minus pad to change the delay time from
1 to 24 hours. The display will automatically go back to the
set temperature after 10 seconds.
3. To display the amount of time left, depress TIMER once.
4. To turn Timer off, press TIMER twice.
To operate air conditioner with remote control
NOTE: Two AAA batteries (included) power the remote control.
Replace batteries after 6 months of use, or when the remote
control starts to lose power. Be sure to install batteries with
correct polarity. Screwdriver required to remove battery cover.
To turn the air conditioner on or off:
Press POWER.
To raise the temperature:
Press the TEMP plus pad to raise the temperature 1º until it
reaches 88ºF (31ºC).
10
To lower the temperature:
Press the TEMP minus pad to lower the temperature 1º until it
reaches 66ºF (19ºC).
To select the mode:
Press MODE.
NOTE: Works the same as the air conditioner touch pad control.
To select the fan speed:
Press FAN SPEED.
NOTE: Works the same as the air conditioner touch pad control.
To set Timer for a 1- to 24-hour delay before air conditioner
turns on (air conditioner must be Off):
1. Press TIMER.
2. Press the plus or minus pad to change the delay time from
1 to 24 hours.
To set Timer for a 1- to 24-hour delay before air conditioner
turns off (air conditioner must be On):
1. Press TIMER.
2. Press the plus or minus pad to change delay time from 1 to
24 hours.

Changing Air Direction

Use levers to adjust louvers for desired airflow.
1
1. Lever