Video Signal Format - Videotec NTC Manuel D'instructions

Select the Serial option (RS-232) and, in the next
window, choose the right COM Port.
Fig. 16
Confirm with the Finish key.
When the software establishes a connection with the
camera, the word 'Connected' appears at the bottom
of the window and the bar is green instead of grey.
Fig. 17
MNVCNTC_1637_EN

7.4.2 Video signal format

By default, the FLIR module generates a video signal
in NTSC format.
To generate a video signal in PAL format, click on the
Video key and select the Video Standard/PAL radio
button.
Fig. 18
13