Hygiene Treatment; Cleaning; Disinfecting - Seca 745 Mode D'emploi Et Garantie

6. HYGIENE TREATMENT

6.1 Cleaning

6.2 Disinfecting

40 •
NOTICE!
Incorrect measurement due to force shunts
If an additional weight such as a large towel is in
contact with the surface on which the scale is
standing, the weight will not be measured
correctly.
– Make sure that any additional weights is only
placed on the tray of the scale.
1. Place the additional weight on the tray.
2. Balance the beam (see the section entitled "Balanc-
ing the beam" on page 37).
3. Perform the weighing operation (see "Performing a
weighing operation" on page 38).
NOTICE!
Damage to device
Inappropriate detergents and disinfectants may
damage the sensitive surfaces of the device.
– Use only disinfectants free of chlorine and
alcohol which are explicitly suitable for acrylic
sheet and other sensitive surfaces (active
ingredient: quaternary ammonium
compounds, for example).
– Do not use white spirit or petroleum spirit.
– Only use disinfectants suitable for sensitive
surfaces. Suitable disinfectants are available
from specialist dealers.
Use a soft cloth dampened with mild soapsuds to
clean the surfaces of the device.
1. Check that your disinfectant is suitable for sensitive
surfaces and acrylic sheet.
2. Follow the instructions on the disinfectant.
3. Disinfect the device by moistening a soft cloth in
disinfectant and wiping the device over with it.