Remove Transport Lock; Put On Tray; Set Up And Align Scale - Seca 745 Mode D'emploi Et Garantie

4.2 Remove transport lock

4.3 Put on tray

1.
3.
2.

4.4 Set up and align scale

The sliding weights and the tare weight are fixed in
position by a transport lock (rubber band).
Remove the transport lock as shown in the
adjacent diagram before using the scale.
NOTE
Keep the transport lock for subsequent
transport of the scale.
1. Place the tray centrally on the scale.
2. Ensure that the locking levers for the tray engage in
the openings in the housing.
3. Push the locking levers down.
The tray is attached to the housing.
NOTICE!
Incorrect measurement due to force shunts
If the scale is set up or aligned incorrectly,
weight will not be measured correctly.
– Place the scale on a firm and level surface.
– Do not place the scale on changing mats or
towels.
– Set up the scale so that it is not in contact
with any walls or objects.
Before you get started ... • 35
English