Hygiene Treatment - Seca 676 Mode D'emploi Et Garantie

8. HYGIENE TREATMENT

8.1 Cleaning
8.2 Disinfecting
8.3 Sterilizing
88 •
WARNING!
Electric shock
The device is not de-energized when the on/off
key is pressed and the display goes out. Use of
fluids on the device may cause electric shock.
– Before each hygiene treatment, remove the
mains cable to de-energize the device.
– Ensure that no fluids penetrate the device.
CAUTION!
Damage to device
Unsuitable cleaning agents may damage the
sensitive surfaces of the device.
– Do not use aggressive or abrasive cleaning
agents.
– Do not use white spirit or petroleum spirit.
Use a soft cloth dampened with mild soapsuds to
clean the surfaces of the device.
1. Follow the instructions on the disinfectant.
2. Disinfect the device at regular intervals with a com-
mercially available disinfectant, e.g. with 70% iso-
propyl alcohol.
Please take note of the following terms:
• Prior to every measurement with direct skin contact:
– Weighing platform
• After every measurement with direct skin contact:
– Weighing platform
• If required:
– Display
– Membrane keyboard
The sterilisation of this device is not permitted.