Overview; Controls - Seca 745 Mode D'emploi Et Garantie

3. OVERVIEW

3.1 Controls

:
seca 745/725
1
2
3
4
No. Control
1
Large sliding weight
2
Small sliding weight
Tare weight with
3
knurled screw
4
Fine-tare screw
5
Tray
6
Locking lever
Pointer and counter-
7
pointer
8
Beam with scale
9
Locking lever
32 •
10 11
Can be moved to set the weight display roughly
• Pull forward: release sliding weight
• Release: lock sliding weight in position
Can be moved to set the weight display
accurately
Can be moved to balance the beam
• On initial use and before every weighing
• To tare off an additional weight
Can be adjusted to balance the beam exactly
• On initial use and before every weighing
• To tare off an additional weight
Where the baby is placed
• 2 pcs
• For locking the tray in position on the scale
Indicate whether the beam is balanced
For reading off the weight
For locking/releasing the beam
• Push down: lock in position
• Raise: release
Function
operation
operation
housing
5
6
7
8
9