Turn On The Device - Bresser National Geographic 9075100 Mode D'emploi


ZOOM

IR button

MODE button

SNAP button

POWER button

LCD Screen

IR FILTER

IR LENS

TRIPOD ADAPTER

BATTERY COVER

Hooks for carrying strap

Turn on the device

(1) Long press the POWER button (9) to turn on the binoculars. Once the power is on,
look into the LCD screen inside.
(2) Target the object you would like to view and adjust the focus by turning the focus wheel (1).
(3) For night use, turn on the IR by pressing the IR button (6). Increase the brightness
by pressing the button repeatedly. It has 4 levels of brightness (0/1/2/3)
(4) Long press the POWER button (9) to shut down the device.
When in Video or Photo mode: Press ZOOM to zoom
in at multiple levels (1.5X, 2X). Once reaching 2X, press
ZOOM one more time to go back to normal. The binocu-
lars have a magnification of 3.5X. The maximum digital
zoom is 2X. So the maximum magnification is 7X.
When in Playback mode: Press the ZOOM button to open
the delete menu of the current file.
When in Menu mode: Press the ZOOM to go up.
Press IR for 4 levels of brightness (0/1/2/3) when using the
binoculars at night.
When in Playback mode: Press IR to playback the next file.
When in Menu mode: Press IR to go down.
• There are 4 modes: Video / Photo / Playback / Menu
(in a loop)
• When the power is on, the default mode is video
• Press the mode button to change to the next mode.
When in Video mode: Press the button to start video
recording, press again to stop recording.
When in Photo mode: Press the button to take photos.
When in Playback mode: Press the button to playback
the selected item.
Long press for power on and off
Look inside the LCD Screen and target the object you
would like to view.
Protection lid must be taken off for night use.
Mounting fixture for e.g. a tripod or head mount (tripod or
head mount not included).
4x AA batteries required
13
EN