Operation; Mounting/Removing The Grass Box - Grizzly ARM 4038 Lion-Set Traduction De La Notice D'utilisation Originale

the collection bag, the engine
must be turned off and all mo-
ving parts must have come to a
standstill. Remove the battery
from the device before carrying
out any work.

Operation

Caution! Risk of injury! Always
wear appropriate protective
equipment and work gloves
while working with the appli-
ance. Prior to each use, ensure
that the appliance is working
correctly. Ensure that the coll-
ection bag is installed correctly
and the device has been moun-
ted properly. Do not use the
device if a switch is damaged.
Personal protective equipment
and a fully functional appliance
reduce the risk of injuries and
accidents.
Adjustments on the mower, as
well as assembly and disas-
sembly of the collection basket,
mulch kit and lateral ejection
chute, etc. may only be made
while the motor is switched off
and the blades are at a stand-
still.
Switch of the device, pull the con-
tact chip (
blades to come to a stop. There is
a risk of personal injury.
Observe noise control and local
regulations.
17) and wait for the
Mounting/removing the grass
box
1. To mount the grass catch box
(13) lift the impact protection
(14) and mount the grass cat-
cher box (13).
2. Lower the collision guard (14)
onto the grass box (13) - it will
keep it in place.
3. To remove the grass box (13),
lift the collision guard (14) and
unhook the grass box from
the mounting bracket. Flap
down the collision guard to the
housing.
A level indicator is fitted on the
side of the grass bag.
Flap open:
grass catcher empty
Flap closed:
grass catcher full
GB
33