Grizzly ERM 1846 GT Traduction De La Notice D'utilisation Originale page 26

GB
Maintenance and Storage:
When servicing the blades,
remember that they can move
even if the power source is off.
• Ensure that all nuts, bolts and
screws are tightened firmly and
the equipment is in safe working
condition.
• Check the mower for any dama-
ges.
• Repair damaged parts as appro-
priate.
• Do not attempt to repair the
equipment yourself unless you
have been trained to do so. Any
work not specified in these inst-
ructions is to be carried out only
by customer service centres that
we have authorised.
• Keep the equipment in a dry loca-
tion and out of reach of children.
• Handle the equipment with care.
Keep tools sharp and clean, in
order to facilitate better and safer
work. Follow the maintenance
instructions.
• Wear protective gloves when
changing the cutting device.
• Regularly check the grass collec-
tion device for wear and strains.
For safety reasons, replace worn
or damaged parts. When adjus-
ting the blades, take particular
care to avoid fingers being trap-
ped between the rotating blades
and fixed parts of the machine.
• Check that only replacement
tools authorised by the manufac-
turer are used.
Electrical Safety:
• Ensure that the mains voltage
matches the specifications on the
26
rating plate.
• Connect the equipment to a
socked with a residual current-
operated protective device (RCD)
with a release current of more
than 30 mA.
• Avoid bodily contact with earthed
parts (e.g. metal fences, metal
posts).
• Use only authorised power cables
of type H07RN-F, which are no
more than 75 m long and suitable
for outdoor use. The power cable
wire cross section must be at
least 2.5 mm
unroll cable drums before use.
Check the cable for damage.
• To fix on the power cable, use the
cable suspension intended for
the purpose.
• Keep the power cable away from
the cutting tool when working.
The cutting blades may damage
the power cable and result in
contact with live parts. Always
run the power cable behind the
operator.
• Do not use the power cable to
pull the plug from the socket. Pro-
tect the power cable from heat,
oil and sharp edges.
• Switch off the equipment and dis-
connect the plug from the socket
if the power cable is damaged. If
the power cable is damaged, it
must be replaced by the manu-
facturer, the customer services of
the same, or a qualified person,
in order to avoid hazards.
• Do not connect a damaged power
cable to the mains. Do not touch
a damaged power cable when it
is connected to the mains. A da-
maged power cable may result in
contact with live parts.
. Always completely
2