Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V1.0
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the missing
part before operating. Failure to do so could result in a malfunction and
personal injury.
Remove the parts and accessories from the packaging and inspect for damage. Make
sure that all items in the contents are included.
Contents:
• Winch
• Cable with hook • Mounting Hardware
IDENTIFICATION KEY
A
Wiring
B
Wire Cable
C
Control Box
D
Clutch
E
Winch
F
Hook
G
Hawse Fairlead
H
Strap
I
Remote (not shown)
ASSEMBLY & INSTALLATION
Use the included hardware to attach the winch to the location and the fairway
to the winch.
1.
Install a mounting plate that is capable
of withstanding the stresses acting
upon it without bending or breaking
(see Specifications). The drum supports
must sit flush with no gaps.
2.
This winch can generate extreme
forces. Select a location that can
withstand the rated capacity
without damage or weakening. Steel
reinforcement plates may be needed
or a certified welder may need to
weld on additional bracing
depending on the mounting location.
Visit www.princessauto.com for more information
12V DC Winch
• Tethered Remote
8955114
• Hawse Fairlead
Fig. 1
Fig. 2
7
Publicité
Table des Matières
