Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8955114
16. Do not use the winch to transport animals or people.
17.
Do not use the vehicle to 'assist' the winch in moving a load. This applies
additional strain on the winch and can damage it or snap the winch cable.
ELECTRICAL SAFETY
WARNING! Do not touch or handle a live tool with any part of your body that is
wet or damp. Wet skin reduces resistance to electrical current, increasing the
danger of a serious or fatal shock.
1.
Disconnect tool from power source before cleaning, servicing, changing
parts/accessories or when not in use.
2.
Protect yourself against electric shocks when working on electrical
equipment. Avoid body contact with grounded surfaces. There is an
increased chance of electrical shock if your body is grounded.
3.
Do not expose the tool to rain or wet conditions. Water entering a tool will
increase the risk of electric shock.
4.
Do not alter any parts of the tool or accessories. All parts and accessories are
designed with built-in safety features that may be compromised if altered.
5.
Make certain the power source conforms to requirements of your
equipment (see Specifications).
6.
When wiring an electrically driven device, follow all electrical and safety
codes, as well as the most recent Canadian Electrical Code (CE) and
Canadian Centre for Occupational Health and Safety (CCOHS).
7.
Disconnect the battery cables before working near the cable, drum,
fairlead or load, to prevent accidental starting.
WARNING! All wiring should be performed by a qualified electrician.
BATTERY CABLES
1.
Do not operate this tool if the battery cables are frayed or damaged, as an
electric shock or surge may occur, resulting in personal injury or property
damage.
2.
Keep all connections dry and off the ground to reduce the risk of electric
shock. Do not touch battery cables with wet hands.
3.
Prevent damage to the battery cables by observing the following:
a.
Do not pull on the cable to disconnect it from the battery
b.
Keep the battery cables away from heat, oil, sharp edges or moving
parts.
6
12V DC Winch
For technical questions call 1-800-665-8685
V1.0
Publicité
Table des Matières
