Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V1.0
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the missing
part before operating. Failure to do so could result in a malfunction and
personal injury.
Remove the parts and accessories from the packaging and inspect for damage. Make
sure that all items in the contents are included.
Contents:
• Winch
• Hook with Strap
• Grade 8 M12-1.75x25 mm
IDENTIFICATION KEY
A
Wiring
B
Wire Cable
C
Control Pack
D
Clutch
E
IN Button
F
Remote
G
OUT Button
H
Winch
I
Hawse Fairlead
J
Hook
K
Strap
ASSEMBLY & INSTALLATION
Use the included hardware to attach the winch to the location and the fairway
to the winch.
1.
Install a mounting plate that is capable of withstanding the stresses
acting upon it without bending or breaking (see Specifications). The drum
supports must sit flush with no gaps.
2.
This winch can generate extreme forces. Select a location that can
withstand the rated capacity without damage or weakening. Steel
reinforcement plates may be needed or a certified welder may need to
weld on additional bracing depending on the mounting location.
Visit www.princessauto.com for more information
12V DC Winch
• Tethered Remote
• Grade 8, M10-1.50x30 mm (4)
• Hawse Fairlead
8942724
Fig. 1
7
Publicité
Table des Matières
