Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V1.0
6.
Pull out the cable by the hook strap until you
have the desired length out.
a.
Make sure there is always five turns of cable
on the winch drum.
7.
Attach the steel cable to the load with a hook,
shackle, sling or chain capable of withstanding
the strain from winching the load. Make sure the
terminal tackle is secure to avoid an unintended
disconnection while winching.
a.
Consult the vehicle owner' s manual for anchor points to connect the
steel cable' s terminal tackle if connecting to another vehicle.
8.
Re-engage the clutch by twisting the clutch knob to the right until it locks
in place.
9.
Check that the line is straight without kinks or twisted. Do not wrap the
steel cable around the load or wind it around corners or obstacles.
10. Place a dampening device on the steel cable, if you have one available.
11.
Press and hold the lower part of the remote control' s switch until the slack
is removed from the steel cable.
12. Recheck the connections to ensure the terminal tackle will not shift.
a.
Check the clutch is engaged. Do not pull the clutch knob out when
the winch is under load.
13. Press and hold the lower part of the remote control' s switch to pull the load
towards the winch. Release the switch when the load is in the final position.
a.
Secure the load in place if necessary. Use wheel chocks for a vehicle.
14. Press and hold the upper part of the remote control' s switch to remove
tension on the steel cable. Disengage and remove the hook or terminal tackle.
15. Hold the hook strap to keep some pressure on the winch and retract the
steel cable. Make sure each wire wrap fits snugly with the next wrap.
16. Disconnect from the power supply once the hook reaches the winch fairlead.
17.
Disconnect and store the remote.
WINCHING LIMITATIONS
There are several limitations that can affect the time duration, power
consumption and maximum weight a winch can move. A snatch block will
improve the winch' s performance. Make sure to follow all safety and operation
instructions from the snatch block' s manufacturer.
Visit www.princessauto.com for more information
12V DC Winch
8955114
Fig. 6
11
Publicité
Table des Matières
