Assembly & Installation - Power Fist 8900771 Mode D'emploi

V1.0
12. Never operate the winch if the cable shows any signs of weakening, is
knotted or kinked.
13. Do not cross over or under the cable while under load.
14. Do not move vehicle with cable extended and attached to load to pull
it. The cable could snap.
15. Apply blocks to vehicle when parked on an incline.
16. Re-spool cable properly.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
1. Carefully remove the winch from the package.
a. Retain packing material until you have carefully inspected and
satisfactorily installed and operated the winch.
2. Inspect the parts carefully to make sure winch was not damaged
while shipping.
IDENTIFICATION KEY
A Handle
B Drum
C Lock Nut
D Ring Gear
E Rod Frame
F Worm Gear
G Bushing
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the
included Parts List. Letter references in parenthesis
(A) refer to the included Identification Key.
MOUNTING
Mounting structure must be capable of
withstanding loads within the capacity of the winch
(see Specifications). For increased strength and
Visit www.princessauto.com for more information
Worm Gear Hand Winch 8900771
Fig. 2
5