Power Switch - JUKI TL-2200QVP Mini Manuel D'instructions

Name and Function of each component
Manual
thread cutter
ON
OFF
Faster speed
Slower speed
Thread trimming
foot switch

■ Power switch

Turn ON when it is pressed on your side.
Turn OFF when it is pressed on the other side.
■ Speed control knob
Maximum sewing speed can be freely set by the speed
controller.
■ Manual thread cutter
Lift the needle and the presser foot after the completion
of sewing, draw out the material, and cut the thread
with the manual thread cutter.
■ Automatic thread trimming switch/
Thread trimming foot switch
When the sewing is completed, both the needle and
the bobbin threads can be simultaneously trimmed. You
can re-start sewing even if the bobbin thread does not
appear on the throat plate.
Use either one of the two switches when trimming
thread.
"Thread trimming foot switch"
When the heel side of the foot controller is pressed, the
threads are trimmed.
9