Attaching The Pinpoint Nozzle - Dirt Devil Power Maid Mode D'emploi

3 Fitting on accessories

3.3 Attaching the pinpoint nozzle

4
5
6
90°
7
20
90°
You can use the pinpoint nozzle to powerfully
and specifically team clean crevices, Vene-
tian blinds, toilet bowls, bathroom fixtures,
etc.
NOTE:
For greater range we recommend fitting the
pinpoint nozzle on the connection piece of
the steam hose (Fig. 4 and Fig. 5).
If you prefer to operate the hand-held steam
cleaner with one hand, we recommend that
you fit the pinpoint nozzle directly on the
connection piece (Fig. 6 and Fig. 7).
1. If desired fit on the steam hose as de-
scribed, ZChapter 3.2, "Attaching the
steam hose".
2. Slide the pinpoint nozzle into the adapter
of the steam hose (Fig. 4) on of the appli-
ance (Fig. 6) so that the two tabs on the
pinpoint nozzle engage in the two aper-
tures in the adapter.
3. Fasten the pinpoint nozzle by pushing it
and simultaneously turning it 90° in the di-
rection of the arrow (Fig. 5, Fig. 7).
NOTE:
You can detach the pinpoint nozzle by
simultaneously pushing it in and turning it in
the opposite direction.