Preparing For Use; Unpacking; Attaching The Steam Hose; Preparing To Steam-Clean Small Surfaces - Dirt Devil Aqua Clean M319 Mode D'emploi

M319.book Seite 24 Donnerstag, 28. November 2013 2:39 14

3 Preparing for use

3.1 Unpacking

3 Preparing for use
ATTENTION:
Always transport/send the appliance in its original packaging to avoid
transport damage. Keep the packaging for such an event.
However, dispose of no-longer-needed packaging material properly.

3.2 Attaching the steam hose

A
2

3.3 Preparing to steam-clean small surfaces

A
3
90° 90°
A B
4
A A
5
24
B
1
B
click!
90° 90° 90°
C D E
90°
B C
1. Unpack the appliance and its accessories (fig. 1).
2. Check the contents for completeness and possible damage.
NOTE:
Immediately contact your dealer if you have found damage resulting
from transport.
1. Open the lid of the steam hose connection nozzle (Fig. 2/A).
2. Put the steam hose adapter into the steam hose connection nozzle
(Fig. 2/B). You will hear and feel both its release catches (Fig. 2/1) snap
into place.
NOTE:
If you want to release the steam hose after use, press both the release
catches (Fig. 2/1) on the steam hose adapter and pull it off.
 Mount accessory adapter (Fig. 3/A):
NOTE:
Before you can fix the special nozzles to the steam pistol, you have to
mount the accessory adapter. If required, you can also use the acces-
sory adapter without any further attachment for numerous cleaning jobs.
1. Attach the accessory adapter to the steam pistol as shown (Fig. 3/A).
You will feel and hear it snap into place.
NOTE:
To release the accessory adapter at any time, push the release catch on
the steam pistol.
 Attaching further accessories:
NOTE:
The attachments shown (Fig. 4, Fig. 5) can only be put onto the previ-
ously mounted accessory adapter.
1. Select a special attachment:
- the plastic brushes (Fig. 4/A,B) on insensitive surfaces to remove
large quantities of dirt;
- the jet nozzle (Fig. 4/C), if you want the steam jet to be more concen-
trated than when just using the accessory adapter;
- the spatula attachment (Fig. 4/D) on insensitive, flat surfaces to re-
move stubborn layers of dirt;
- the crevice brush (Fig. 4/E) to remove stubborn dirt from between
tiles and cracks;
- the 2-in-1 combi attachment with scraper lip (Fig. 5/A,B) to steam-
clean smooth polished surfaces;
- the 2-in-1 combi attachment with cotton cover (Fig. 5/C) to steam-
clean upholstery and clothes.
2. Push the selected attachment onto the accessory adapter so that the
small triangle on the respective attachment and the arrow on the acces-
sory adapter are opposite one another (Fig. 4, Fig. 5).
3. Lock the selected attachment to the accessory adapter by turning it
through 90° as shown (Fig. 4, Fig. 5).
NOTE:
Should you wish to release the adapter from the attachment, simply
rotate it through 90° in the other direction and pull it off forcefully.