Attaching The Pinpoint Nozzle - Dirt Devil Aqua clean Mode D'emploi

02_DD302_gb.book Seite 52 Freitag, 17. April 2015 1:44 01
7 Working with the hand-held steam cleaner
7.2 Attaching the pinpoint
nozzle
22
23
90°
24
25
90°
52
You can use the pinpoint nozzle to powerfully and accurate-
ly steam clean crevices, Venetian blinds, toilet bowls, bath-
room fixtures, etc.
NOTE:
For greater range we recommend fitting the pinpoint noz-
zle to the connection piece on the steam hose (Fig. 22
and Fig. 23).
If, on the other hand, you prefer to operate the hand-held
steam cleaner with one hand, we recommend that you fit
the pinpoint nozzle directly to the connection piece
(Fig. 24 and Fig. 25).
1. If desired, fit on the steam hose as described, Chapter
7.1, "Attaching the steam hose".
2. Now slide the pinpoint jet nozzle into the nozzle of the
steam hose (Fig. 22) or the appliance (Fig. 24).
3. Secure the pinpoint nozzle by pushing it and simultane-
ously turning it 90° in the direction of the arrow (Fig. 23,
Fig. 25).
NOTE:
You can detach the pinpoint nozzle by simultaneously
pushing it in and turning it in the opposite direction.