Dismount; Dismounting Steps; Disposal - SICK LFV200 Manuel De Mise En Service

7 Dismount

Error Reason
Green sig- Voltage
nal lamp off supply inter-
rupted.
Electronics
defective
Red signal Error with
lamp lights the elec-
(switching trical
output high- connection
impedance)
Shortcircuit
or overload
Red sig- Vibrating
nal lamp frequency
flashes out of speci-
(switching fication
output high-
Buildup on
impedance)
the vibrating
element
Vibrating
element da-
maged
7 Dismount
7.1

Dismounting steps

Warning:
Before dismounting, be aware of dan-
gerous process conditions such as e.g.
pressure in the vessel, high temperatu-
res, corrosive or toxic products etc.
Take note of chapters "Mounting" and "Connec-
ting to power supply" and carry out the listed
steps in reverse order.
7.2

Disposal

The instrument consists of materials which can
be recycled by specialised recycling companies.
We use recyclable materials and have designed
the electronics to be easily separable.
WEEE directive 2002/96/EG
This instrument is not subject to the WEEE
directive 2002/96/EG and the respective nati-
onal laws. Pass the instrument directly on to a
specialised recycling company and do not use
the municipal collecting points. These may be
used only for privately used products according
16
Rectification
Check the voltage supply
and the cable connection
Exchange the instrument
or send it in for repair
Connect the instrument
according to the wiring
plan
Check the electrical con-
nection
Check the vibrating ele-
ment on buildup and
remove it
Check the vibrating ele-
ment and the sensor if
there is buildup and re-
move it
Check if the vibrating
element is damage or ext-
remely corroded
to the WEEE directive.
Correct disposal avoids negative effects on
humans and the environment and ensures
recycling of useful raw materials.
Materials: see chapter "Technical data"
If you have no way to dispose of the old instru-
ment properly, please contact us concerning
return and disposal.
LFV200 • IO-Link