Replacing The Oven Burner Nozzle - Angelo Po 1G1FAPG Manuel D'utilisation Et D'installation

REPLACING THE OVEN BURNER NOZZLE

To carry out this operation, proceed as follows.
1-Turn off the gas supply tap.
2 - Undo the scr ews (A) and remo ve the control
panel (B).
3 - Unscrew the nozzle (C) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
4 - Replace the control panel (B).
REPLACING THE PLATE BURNER PILOT LIGHT NOZZLE
To carry out th is operation,
proceed as follows.
1 - Turn off the gas supply
tap.
2 - Pull off the knob (A).
3 - Undo the scr ews (B)
and remove the control
panel (C).
4 - Unscrew the union (D).
5 - Extract the nozzle ( E)
and replace it with th e
one suitable for the type
of gas in use (see table
at back of manual).
6 - Retighten the union (D).
REPLACING THE TOP BURNER PILOT LIGHT NOZZLE
To carry out this operation,
proceed as follows.
1-Turn off the gas supply
tap.
2 - Pull off the knob (A).
3 - Undo the scr ews (B)
and remove the control
panel (C).
4 - Remove the pipe (D).
5 - Remove the nozzle (E)
and replace it with th e
one suitable for the type
of gas in use (see table
at back of manual).
6 - Replace the pipe (D), the control panel (C) and
the control knobs (A).
B
C
A
7 - Replace the control panel (C) and the knob (A)
on completion of the operation.
B
A
- 25 -
A
D E
B
D E
C
C
IDM-39606200400.tif
IDM-39618501800.tif
IT
GB
DE
FR
ES
10
IDM-39618301700.tif
English