Angelo Po 1G1FAPG Manuel D'utilisation Et D'installation page 43

6 - Pressurised water jets may only be used on ex-
ternal parts.
7 - Remove food residues immediately before they
set.
CLEANING THE PLATE
Important
When cleaning, use only food-approved de-
tergents.
To carry out this operation, proceed as follows.
1-Switch the appliance off and leave it to cool.
2 - Use a scraper tool to remove cooking residues
from the plate.
3 - Spread a suitable degreaser on the pla te and
leave it to act for a few minutes.
4 - Clean the plate thoroughly with a sponge, rinse
with plenty of water and dry.
Important
Rinse the cooking plate thoroughly to re-
move all residues of the degreasing deter-
gent, and prevent stains and marks from
CLEANING THE HOB, BURNERS AND ACCESSORIES
To carry out this operation, proceed as follows.
1-Remove the burner cap (A) and the burner (B).
2 - Clean the burner and the flame cap thoroughly
and check that the holes in it are not blocked.
3 - Clean the ignition slot in the burner regularly.
4 - Clean the hob.
Important
The radiant plate comes into contact with
foods; after use, it must be cleaned with a
suitable grease-remover product. If possi-
ble, wash in the dishwasher.
5 - After use, clean the accessories with a suitable
grease-remover product. If possible, wash in
the dishwasher.
6 - Dry the surfaces and reassemble the compo-
nents.
Caution - warning
Never pour water or allow dirt to fall into the
burner as this will cause the burner to malfunc-
tion or block the nozzle.
8 - Remove the limescale deposits which may form
on some of the appliance's surfaces.
forming when the plate is put back into
use.
Caution - warning
Do not wash cast iron parts such as the bur-
ners, burner caps and grills in a dishwasher.
- 13 -
IDM-39618500800.tif
A
B
IDM-39609400900.tif
IT
GB
DE
FR
ES
English