Inspection And Maintenance Plan - Güde 550/25 Li-Ion Traduction Du Mode D'emploi D'origine

ENGLISH
22
Transport packaging disposal
The packaging protects the appliance against
damage during transport. Packaging materials
are usually chosen according to environmental-
friendliness and waste treatment aspects and
can therefore be recycled. Returning the pack-
aging to material circulation saves raw materials
and reduces waste. Parts of packaging (e.g.
foils, styrofoam ®) can be dangerous to children.
Risk of suffocation! Keep the packaging out of
reach of children and dispose them as quickly
as possible.

Inspection and maintenance plan

Generally
Before any start-up
storage
Failures - Causes - Removal
Failures
Cutting scissors not
working.
Unsteady running,
strong vibrations
Too short duration
of work per battery
charge.
whole appliance
Plastic body
Knife/cutter bar
ON/OFF switch
Charger connecting cable
whole appliance
Causes
battery is discharged
battery is too cold / hot
Appliance is defective
Internal cables are defective
Appliance is defective
The battery has not been used for a long
time or been used just shortly
battery is empty or defective
Regularly clean the outer part
Let regularly checked by authorized workshop
Check for cracks and fissures
Let regularly sharpen
Functional test
Functional test
To be cleaned and the knife bar slightly lubricated.
To be safely stored in a cold room. Have it checked in a
specialised workshop.
Removal
Charge the battery, see the Note to charging
Have the battery warmed up / cooled down
Consult with the customer service centre
Consult with the customer service centre
Consult with the customer service centre
Charge the battery to full extent, see the
Note to charging
Replace (charge) the battery