Control Panel; Before First Use - Zanussi ZOHEE2X1 Notice D'utilisation

5. CONTROL PANEL

5.1 Sensor fields / Buttons
5.2 Display
A B

6. BEFORE FIRST USE

WARNING!
Refer to Safety chapters.
6.1 Before first use
The oven can emit an odour and smoke during preheating. Make sure that the room is
ventilated.
Step 1
Set the clock
1. , - press to set the time.
After approximately 5 sec., the
flashing stops and the display
shows the time.
Turn off the oven and wait until it is cold. Place the accessories and the removable shelf supports in the oven.
32 ENGLISH
To set the time.
To set a clock function.
To set the time.
A. Clock functions
B. Timer
Step 2
Clean the oven
1. Remove all accessories and re‐
movable shelf supports from
the oven.
2. Clean the oven and the acces‐
sories with a soft cloth, warm
water and a mild detergent.
Step 3
Preheat the empty oven
1. Set the maximum temperature
for the function:
Time: 1 h.
2. Set the maximum temperature
for the function:
Time: 15 min.
3. Set the maximum temperature
for the function:
Time: 15 min.
.
.
.