Maintenance; Spare Parts And Accessories Upon Request - TOPP C130 Mode D'emploi

IT 8
APPENDIX
8.1

MAINTENANCE

If the actuator shows function abnormalities, please
contact the manufacturer.
Any intervention on the actuator (i.e. power cord, etc.), or
on its components, must be done only by the
manufacturer's qualified technicians. Topp will not be
held liable for interventions carried out by non-authorized
persons.
Extraordinary and routine maintenance operations
involving the total or partial dismounting of the actuator
may only be performed after disconnecting it from the
power supply.
The actuator's project uses parts that do not require
periodic or extraordinary maintenance of significant
importance.
The recommended maintenance activities should in any
case involve the periodical execution (every 6 mounths)
of at least the following operations: make sure the
elements that make part of the actuator are cleaned, the
replacement of components that show signs of
superficial damage such as injuries, cracks,
discoloration, etc., he must check the holding of clamping
systems (brackets and screws), check for any
deformations on the window and the consequent holding
of the seals and check the conditions of cabling and
connections. If necessary, remove dirt from the chain with
a soft cloth and then re-coat the chain with a thin layer of
grease (type nyogel788 - Tecnolube Seal).
C130
EN INSTALLATION AND USE INSTRUCTIONS
This maintenance activity may be carried out either by
TOPP, in accordance with a specific agreement made
with the user, or by the installation technician or by other
competent and qualified technical personnel in
possession of all legal requirements.
8.2 SCRAPPING
The actuator should be scrapped in accordance with
current regulations regarding environmental protection.
Differentiate the parts that make up the actuator
according to the various types of materials (plastic,
aluminium, etc.).
SPARE PARTS AND ACCESSORIES
8.3
UPON REQUEST
It is forbidden to use "non-original" spare parts or
accessories that may compromise the safety and
efficiency of the actuator.
Original spare parts and accessories must be requested
exclusively to a reliable reseller or to the manufacturer by
indicating the type, model, serial number and the
actuator's year of manufacture.
25