1- Ec Declaration Of Incorporation Of Partly Completed Machinery - TOPP C130 Mode D'emploi

IT 1
EC DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY
The undersigned, in the name of and
behalf of the following company
Topp S.r.l.
Via Galvani, 59
36066 Sandrigo (VI)
Italia
herewith declares that the person authorised to compile the technical file is
Name: Bettiati Roberto - Topp S.r.l.
Address: via Galvani,59 36066 Sandrigo (VI)
and that to the partly completed machinery
Type: C130
Model(s): C130/RR; C130/230V - C130/24V
the following essential requisites of the
2006/42/EC Machinery Directive (including all applicable amendments)
have been applied and fulfilled: Enclosure I: 1.5.1; 1.5.2; 1.5.10; 1.5.11
that the relevant technical documentation is compiled in accordance with part B of Annex VII of the above
mentioned Machinery Directive..
The above identified partly completed machinery is also in conformity with the all the relevant provisions
of the following directives (including all applicable amendments)
EMC Directive 2014/30/EU
RoHS II Directive 2011/65/EU
The following harmonised standards have been applied:
EN 60335-2-103:2015 (applicable parts)
EN 55014-1:2006 + A1:2009 + A2:2011
EN 55014-2:2015
EN 61000-6-2:2005.
EN 61000-6-3:2007 + A1:2011 + AC:2012.
EN 50581:2012
and the following technical documents:
EN 62233:2008
The undersigned also undertakes the obligation, in response to a duly reasoned request by the national
market surveillance authorities, to transmit to the a.m. authorities, in electronic or paper format, the
relevant technical documentation on the partly completed machinery.
The above identified partly completed machinery must not be put into service until the final machinery
into which it is to be incorporated has been declared in conformity with the provisions of the above
mentioned Machinery Directive.
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Date: Sandrigo01/02/2018
16
CHAIN ACTUATOR FOR WINDOW AUTOMATION
Signature: Matteo Cavalcante
INSTALLATION AND USE INSTRUCTIONS
Amministratore ................................................................
ORIGINAL
EN C130