Product Number (E-Nr.) And Production Number (Fd); Accessories; Installation Instructions; Safety Clearances - CONSTRUCTA CD939850 Manuel D'utilisation Et Notice D'installation

en Accessories
10.1 Product number (E-Nr.) and production
number (FD)
You can find the product number (E-Nr.) and the pro-
duction number (FD) on the appliance's rating plate.
11 Accessories
You can buy accessories from the after-sales service,
from specialist retailers or online. Only use original ac-
cessories, as these have been specifically designed for
your appliance.
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance. → Page 24
You can find out which accessories are available for
your appliance in our catalogue, in the online shop or
from our after-sales service.
www.constructa.com
12 Installation instructions
Observe this information when installing the appliance.
12.1 Scope of delivery
After unpacking all parts, check for any damage in
transit and completeness of the delivery.
24
Depending on the model, the rating plate can be found:
¡ Inside the appliance (remove grease filters for ac-
cess).
¡ On top of the appliance.
Make a note of your appliance's details and the Cus-
tomer Service telephone number to find them again
quickly.

Accessories

Clean Air Standard recir-
culation kit – narrow, 260
mm
Clean Air Standard recir-
culation kit, external –
narrow, 260 mm
Clean Air Standard odour
filter (replacement)
12.2 Safety clearances
Comply with the safety clearances for the appliance.
For Australia and New Zealand the minimum safety
clearance above electrical cooktops must be 600 mm.
Order number
CZ52CBI2X4
CZ5286X0
CZ5170X1