Aurora PVI-10.0-I-OUTD-400 Manuel D'utilisation page 79

Use and installation manual
(PVI-10.0/12.0-I-OUTD(-S)-400 Rev:1.3)
•
In the "Configure inverter" window, click on "Scan": all the connected
inverters will be shown under "Inverter list". Select the inverter upon
which the test is to be performed and press "OK".
•
On the start-up page, the selected inverter will now be shown. Right-click
on the S/N of the inverter and click "Autotests".
78 97
Page of