Aurora PVI-10.0-I-OUTD-400 Manuel D'utilisation page 7

Use and installation manual
(PVI-10.0/12.0-I-OUTD(-S)-400 Rev:1.3)
OPERATION
The system in which the inverters are installed must be equipped with further
control and protection devices, in accordance with the relative applicable safety
standards, e.g. compliance with technical equipment, accident-prevention
regulations, etc. Calibration variations are possible through the use of the
operational software. After having disconnected the inverter from the mains grid,
the live parts and the electrical connections must not be touched for a while, as
capacitors may still be charged. For this reason, all the related signs and marks
present on the devices must observed. During operation, all covers and doors must
be closed.
MAINTENANCE AND ASSISTANCE
The manufacturer's documentation must be observed.
KEEP ALL DOCUMENTATION IN A SAFE PLACE!
6 97
Page of