Grounding Of Dc Inputs - Aurora PVI-10.0-I-OUTD-400 Manuel D'utilisation

Use and installation manual
(PVI-10.0/12.0-I-OUTD(-S)-400 Rev:1.3)
Fig. 13 – Standard selector switches for grid and grounding connector
3.4.9

Grounding of DC inputs

WARNING:
connection/disconnection procedure detailed in paragraph 3.4.1.
These inverter models are equipped with a special connector for grounding one of
the input terminals.
By positioning this connector, it is possible to choose which terminal to connect to
the ground. By observing Fig. 13
connectors to which it can be connected in order to make the grounding effective.
NOTE: The AURORA inverters are delivered with negative grounding,
Fig. 14A. Any change to the connection is to be made during the
installation process.
Before carrying
,
it is possible to see the cabling and the
out any operation,
36 97
Page of
follow the