Aurora PVI-10.0-I-OUTD-400 Manuel D'utilisation page 58

Use and installation manual
(PVI-10.0/12.0-I-OUTD(-S)-400 Rev:1.3)
E-tot : Total energy produced since installation
E-par Partial energy produced during the period selected by us
:
P-out : measured instant output power value
In the second line of the display, only the higher of the two temperatures is shown:
T-boost1: booster channel 1 switching device temperature
T-boost2: booster channel 2 switching device temperature
Ppk: maximum peak power value achieved since the "partial" function was
activated.
Ppk-Day: indicates the maximum peak power value achieved during the day. The
counter is reset when the unit is shut down.
VoutR 230 V
Vout AvgR 230 V
VoutX: measured instant voltage of grid phase / neutral
Vout AvgX: average voltage of grid phase / neutral calculated over the last 10
minutes of inverter operation
VoutRS 400 V
Vout AvgR 230 V
VoutXX: instant value of chained voltage
IoutR 5.6 A
FoutR 50.01 Hz
Iout: measured instant grid current value
Fout: measured instant grid frequency value
P-out 0 W
T-boost1 - °C
Ppk W
Ppk-Day ............W
VoutS 230V
Vout AvgS 230V
VoutST 400V
Vout AvgS 230V
IoutS 5.6 A
FoutS 50.01 Hz
57
Page of
VoutT 230 V
VoutAvgT 230 V
VoutTR 400V
VoutAvgT 230 V
IoutS 5.8 A
FoutS 50.01 Hz
97