Cr2032 Lithium Battery Replacement - Aurora PVI-10.0-I-OUTD-400 Manuel D'utilisation

Use and installation manual
(PVI-10.0/12.0-I-OUTD(-S)-400 Rev:1.3)
3.5

CR2032 Lithium Battery Replacement

WARNING:
connection/disconnection procedure detailed in paragraph 3.4.1.
Inside AURORA, there is a CR2032 lithium battery. When the battery is at its end-
of-life, a message will be shown on the LCD display indicating the battery state.
The battery can easily be seen once the front panel has been removed (see
paragraph 3.4.2).
The component cannot be assembled vertically to its container, but it must be
inserted from the side (Side A), at an angle of around 30°. The component will
rotate inside the battery port until it seats in the right position.
WARNING:
only.
Before carrying
Fig. 15 – Lithium battery replacement
The battery must be replaced by qualified personnel
out any operation,
38 97
Page of
follow the