Aurora PVI-10.0-I-OUTD-400 Manuel D'utilisation page 62

Use and installation manual
(PVI-10.0/12.0-I-OUTD(-S)-400 Rev:1.3)
5.5.5.1 Total
By selecting Total, you can access the following information:
Time: Total operation time
E-tot: Total energy produced
Val. : Economic gain
CO2: CO2 saving compared to fossil fuels
5.5.5.2 Partial
By selecting Partial, you can access the following information:
Time: Total operation time since the count was last reset *
E-par: Total energy produced since the count was last reset*
PPeak: Measured peak power value since the partial meter was activated
Val. : Economic gain since the count was last reset*
CO2: CO2 saving compared to fossil fuels since the count was last reset*
* Resetting all meters in this submenu can be done be keeping the ESC key (4
from display) pressed down for more than 3 seconds. After this time, a sound will
repeat three times.
Time h
E-tot KWh
Val. EUR
CO2 Kg
Time h
E-par KWh
Ppeak W
Val. EUR
CO2 Kg
61 97
Page of
th