Keys And Symbols; Operating Elements And Displays - Fronius Primo 208-240 Instructions De Service

Keys and symbols

Operating ele-
ments and dis-
(1)
plays
(2)
(3)
(4)
Control and status LEDs
(2)
(3)
(4)
Function keys - each has a different function depending on the selection:
(5)
(6)
(7)
(8)
The keys are capacitive by design and wetting them with water may impair their
function. For optimal function, wipe the keys with a dry cloth if necessary.
(5) (6) (7) (8)
General status LED (red)
is illuminated:
- If a status code is shown on the display
- With an interruption to the grid power feed operation
- During troubleshooting (the inverter is waiting to be reset or for an
error to be corrected)
Status LED (orange)
is illuminated:
- If the inverter is in the automatic startup or self test phase (as
soon as the solar modules yield sufficient power output after sun-
rise)
- If the inverter has been set to standby operation in the setup
menu (= manual shutoff of grid power feed operation)
- If the inverter software is being updated
Operating LED (green)
is illuminated:
- If the photovoltaic system is operating without errors after the in-
verter's automatic start-up phase
- As long as grid power feed operation is taking place
"Left/Up" key
for navigating left and up
"Down/Right" key
for navigating down and right
"Menu/Esc" key
for switching to the menu level
to exit the Setup menu
"Enter" key
for confirming a selection
Item Description
(1) Display
for displaying values, set-
tings, and menus
17