Control Panel - Progress PI1315 Notice D'utilisation

20 progress
Filters
7
Lower spray arm
8

CONTROL PANEL

Programme marker
1
On/off indicator light
2
Indicator lights
3
Start/cancel button
4
Programme knob
5
Washing phase indicator. It comes on when the washing phase or the rinsing
phases operate.
Drying phase indicator. It comes on when the drying phase operates.
End indicator. It comes on in these conditions:
• When the washing programme is completed.
• When you adjust the level of the water softener.
• When there is a malfunction of the appliance.
Salt indicator. It comes on when it is necessary to fill the salt container.
1)
After you fill the container, the salt indicator can stay on for some hours. This
does not have an unwanted effect on the operation of the appliance.
1) When the salt container is empty, the related indicator does not come on while a washing programme operates.
Start/cancel button
Use this button for these operations:
• To start a washing programme. Refer to
'Setting and starting a washing pro-
gramme'.
• To cancel a washing programme in pro-
gress. Refer to 'Setting and starting a
washing programme'.
Upper spray arm
9
Indicators
• To adjust electronically the level of the
water softener. Refer to 'Setting the wa-
ter softener'.
Programme knob and on/off indicator
To activate the appliance and set a
washing programme
• Align a washing programme that is on the
programme knob with the on/off indica-
1 2
5 4
3