Control Panel - Progress PV 1530 Notice D'utilisation

68 progress

Control panel

1 On/Off button
2 Programme selection / cancel button (Reset)
3 Indicator lights
4 Programme lights
Programme lights A and B
In addition to the selection of the corre-
sponding washing programme; these lights
will also guide you in the following operations:
End Comes on when a washing programme has ended. It also has added functions of
visual signalling as:
– the setting of the water softener level,
– deactivation/activation of the audible signals,
– intervention of an alarm due to malfunction of the machine.
Salt Comes on when the special salt has run out.
Setting mode
Press the On/Off button; if ALL programme
indicator lights are off and the End indicator
light is flashing, the appliance is in setting
mode.
Always remember that when performing
the following operations:
– selecting a washing programme,
– setting the water softener level,
– deactivating/activating the audible
signals,
the appliance MUST be in setting mode.
Press the On/Off button; if a programme in-
dicator light is on with a fixed light, the last
1 2
A B
– setting the water softener level,
– deactivating/activating the audible signals.
Indicator lights
performed or selected programme is still set.
In this case, to return to setting mode the
programme has to be cancelled.
To cancel a set programme or a
programme in progress
Press and hold, for about 3 seconds, the
programme selection/cancel button until the
End indicator light is flashing. The pro-
gramme has been cancelled and the appli-
ance is now in setting mode.
Audible signals
Audible signals have been introduced to help
indicate which operations the appliance is
performing:
3 4