Ordering Information; Section 2 Introduction - ESAB Powercut 650 Manuel D'instructions

SECtIoN 2
POWERCUT 650 Cutting Package
®
• Manually cuts 15.9mm (5/8 inch) and severs 19.1mm (3/4
inch) - powerful cutting performance
• Economical price - tremendous cutting value for the
money
• Compact portable design - goes to the job, easily moved
about
• Delivers big machine cutting power in a rugged,
lightweight package.
• Arrives ready to cut, with torch connected and front-end
parts in place, for the ultimate in operator convenience.
• High frequency starting - starts through paint
• Trigger lock-in for long-cut operator comfort.
• Adjustable output - tailor the current to the material being
cut
• Compact simple torch - easy access, little maintenance
• New quick - connect torch switch plug
• New durable torch cable prevents snagging on fixtures
and materials
• Patented XT nozzles - extended shape gives good
visibility as well as good consumable life
• Drag or standoff cutting - easy operation with little
or no training
• Template following feature - easily duplicates curves or
straight lines
• Tolerates poor power lines
Specifications
Cuts 15.9mm (5/8 in.); severs 19.1mm (3/4 in.)
Output: 40% duty cycle ..........................................................40A/120V
60% duty cycle ..........................................................30A/120V
100% duty cycle .......................................................22A/120V
Output Current Range ............................................................... 10 to 40 Amperes
Open Circuit Voltage 290 Vdc Nominal
Input @ 40A/120V ........................230 vac 1/3 ph. 50/60 Hz., 37/20 amps
Input @ 40A/120V .....................................400 vac 3 ph. 50/60 Hz., 9 amps
400V CE Mains Supply ..................................................................... S
...................................................................................................................... Z
Power factor @ 40A Output .............................................................76% (1 Phase)
Efficiency @ 40A Output ....................................................................85% (Typical)
Air requirements .......................... 118 l/m @ 5.5 bar (250 cfh at 80 psig)
Dimensions: Length ..............................................................406mm (16.00")
w/ handles .................................................653mm (25.70")
Height ...............................................................416mm (16.38")
Width ................................................................318mm (12.50")
w/ Opt. torch wrap .................................394mm (15.50")
Weight (less torch & work cable).................................................... 24 kg (53 lbs.)
400V CE Mains Supply, S
sc min
Minimum short circuit power on the network in accordance with
IEC61000-3-12.
400V CE Mains Supply, Z
max
Maximum permissible line on the network impedance in accordance
with IEC61000-3-11.
Instruction Literature P/N ................................................................. 0558005362
The POWERCUT® 650 comes out of the box ready to go! The torch is at-
tached with parts in place, primary cord is attached and the filter/regulator
is installed. Just hook up the air, plug it in and cut.
PoWErCut® 650 / Pt-31xlPC Cutting Performance
1.3MVA
sc min
0.118Ω
max
How To Order
The POWERCUT® 650 comes complete with everything you need:
console, 7.6m (25 ft.) PT-31XLPC torch, torch spare parts kit, air
filter/regulator, input power cord with plug, 7.6m (25 ft.) work cable
with clamp. System arrives fully assembled and ready to cut.

Ordering Information

POWERCUT
POWERCUT
230 vac 1/3 ph. 7.6m (25 ft.) PT-31XLPC - "CE" .................... 0558004800
400 vac 3 ph. 7.6m (25 ft.) PT-31XLPC - "CE"......................... 0558004801
400 vac 3 ph. 7.6m (25 ft.) PT-31XLPC..................................... 0558007821
101
INtroDuCtIoN
Cut Speeds
tHICKNESS
650 / 7.6m (25 ft.) PT-31XLPC "CE" package
®
650,
®
40 Amp
Mild Steel