Usb (Mp3 Player); General Notes; Activating The Mass Storage Device; Operation - Mercedes-Benz Universal Media Interface Notice D'utilisation

MBA_BA_book.book Seite 47 Montag, 19. Mai 2008 12:41 12

General notes

In the case of mass storage devices with
built-in batteries, there can be function re-
strictions when the battery is completely
discharged.
G
Risk of accident
Only connect the mass storage device when
the vehicle is at a standstill. Otherwise, there
is a risk that you could be distracted from
traffic conditions and cause an accident.

Activating the mass storage device

1. Switch on the audio system and call up
the base menu "Disc". (Please refer to
the audio system operating instruc-
tions.)
2. With the CD menu active, switch first
of all into the AUX menu.
The last selected audio source is acti-
vated.
3. If necessary, change the audio source:
select USB.
The folder structure of the connected
mass storage device is displayed.
Note
Files stored in the formats .mp3 and .ogg
are displayed in the folder structure.
Playback is restricted to mp3 files.
4. Select the file folder.
The stored audio file of the selected
folder are displayed in alphabetical or-
der.
Note
Up to 1000 audio files per file folder are
displayed.
5. Select an mp3 file from the list.
Playback is started. The play mode ap-
pears in the display.

USB (mp3 player)

Note
If the mass storage device is disconnect-
ed from the Universal Media Interface
during playback or playback is interrupt-
ed by switching to another audio source,
the current playback position of the se-
lected mp3 file is stored in the Universal
Media Interface. The next time the mass
storage device (with unchanged content)
is selected or the system is switched to
USB, playback of the last selected mp3
file is continued automatically.

Operation

Operation and the play mode are the same
®
as on the iPod . (See page 43.)
47