Changing The Map View Settings - Mercedes-Benz Universal Media Interface Notice D'utilisation

MBA_BA_book.book Seite 37 Montag, 19. Mai 2008 12:41 12

Changing the map view settings

Top information box
1. Select Navi in the navigation menu.
2. Configuration
Information box top.
3. Select the type of display:
• Static: the information box appears
permanently. You can hide it by
sliding om.
• Dynamic: the information box is hid-
den automatically after approx. 10 sec-
onds.
4. Select the display content:
• Arrival time/total dist.:
estimated arrival time and remaining
distance are displayed.
• Arrival time/next man.: esti-
mated arrival time and remaining dis-
tance to the next driving manoeuvre are
displayed.
• Altitude/satellites: the alti-
tude in metres of the current position
and the number of satellites used for
navigation are displayed.
Note
If the route guidance is inactive,
Altitude/satellites is dis-
played continuously in the top informa-
tion box.
Bottom information box
1. Select Navi in the navigation menu.
2. Configuration
Information box bottom.
3. Select the type of display:
• Static: the information box appears
permanently. You can hide it by
sliding mp.
• Dynamic: the information box is hid-
den automatically after approx. 10 sec-
onds.
4. Select the display content:
• Current street name: name of
the road/street on which the car is driv-
ing is shown.
• *Direction: the next road/street
on which the car will drive is shown.
* If this information is unavailable, the name
of the road/street on which the car is driv-
ing is shown.
Navigation system
• Arrival time/total dist.:
estimated arrival time and remaining
distance are displayed.
Display of points of interest
1. Select Navi in the navigation menu.
2. Configuration
Visible POIs on map.
3. Select the categories.
Note
For points of interest to be shown in the
map view, Navi Map Show
POIs must be activated.
The higher the level of detail in the map
view, the longer it takes for the map to
be displayed.
Map
1. Select Navi in the navigation menu.
2. Select Map.
3. Select the perspective of the map
view:
• North up: two-dimensional map view
with north at top.
• Track up: three-dimensional map
view in direction of travel.
37