WARNING
!
•
Do not wire 110 volts to the valve or wall switch.
This appliance must be electrically connected and grounded in accordance with local codes. In the absence of
local codes, use the current CSA C22.1 Canadian electrical code in Canada or the ANSI/NFPA national electrical
code in the United States.
note:
Jumper is only present when appliance is equipped and operated with remote control.
note:
This appliance is equipped with a three-prong (grounding) plug for protection against shock hazard and should
be connected into a properly grounded circuit. Do not cut or remove the grounding prong from the plug.
6.0 wiring diagram
NIGHT
BLOWER
LIGHT
W415-2207 / C / 08.23.18
EN
31