Height Adjustable Armrests Option; Flip-Up Footplate - Quickie 5R Manuel D'instructions

Q UI C KIE 5R
H. PADDED SWING-AWAY ARMRESTS (OPTION)
1. Installation
a. Slide the armrest into the receiver tube on rear of frame.
b. Make sure the bolt (A) is located into the slot (B) on receiver tube
2. Swinging Away
a. Lift armrest out of the locked position and rotate to the side
3. Removing Armrest
a. Pull armrest straight out of the receiver.
I. HEIGHT-ADJUSTABLE ARMRESTS (Optional)
1. Installation
a. Slide the outer armpost ( 1 ) into the receiver (7) mounted to the wheelchair frame.
b. The armrest will lock into place if pressed down firmly.
2. Height Adjustment
a. Rotate height release lever (2) to second stop.
b. Slide armrest pad up or down to desired height.
c. Return lever to locked position against armpost.
d. Push arm pad (4) down until upper armpost locks firmly into place.
3. Removing Armrest
a. To remove the armrest, grip the release lever (3) to unlock and remove the armrest.
J.

FLIP-UP FOOTPLATE

The footplate (C) can be rotated up towards the user for transfers and adjustment.
15
16
14
17
4
6
2
1
8
7
1. Outer armpost
2. Height release Lever
3. Release lever
4. Armrest pad
5. Transfer bar
6. Side panel
7. Receiver
8. Clamp
MK-100083 Rev. A
14
15
5
3
16