Table des Matières
Publicité
GTKS 1800 Pro
The teeth thickness, or the set of the teeth must be
thicker than the body of the blade and the riving
knife. Do not remove the riving knife.
It is necessary to select a saw blade which is suitable
for the material being cut.
Do not use saw blades not corresponding to the key
data given in these instructions for use.
Only use tools that meet standard EN 847-1.
Do not use saw blades made of high-speed steel.
Transport and store the tools in a suitable container;
It is essential to adhere to the maximum speed speci-
fied on the saw blade.
The handle lock must always be engaged when trans-
porting the circular table saw.
Do not use the top protective cover as a handle for
transportation!
before transporting the machine, make sure that the
top protective guard covers the top section of the
saw blade.
To minimise noise, the tool must be sharpened and
all noise reducing elements (covers etc.) must be
properly adjusted.
maintenance
before carrying out any work on the machine,
disconnect the plug from the socket.
Prior to every use, visually check the machine to rule
out any defects, in particular on the power cable and
the plug.
The machine must not be used under any circum-
stances if the machine or the safety devices are
damaged.
Refer all servicing to customer service.
use only original accessories and original spare parts.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insufficient mainte-
nance and care can lead to unforeseen accidents and
injuries.
Guarantee
Guarantee claims as per guarantee card attached.
The guarantee solely covers inadequacies caused
by material defect or manufacturing defect. Original
payment voucher with the sales date needs to be sub-
mitted for any claim in the guarantee period.
The guarantee does not cover any unauthorised
use such as appliance overloading, use of violence,
damage as a result of any unauthorised interference
or caused by foreign items. Failing to follow the ope-
rating and assembly instructions and common wear
are also not included in the guarantee.
Service
Do you have any technical questions? Any claim? Do
you need any spare parts or operating instructions?
we will quickly help you and without needles bure-
aucracy at our web pages at www.guede.com in the
Servicing part. Please help us be able to help you. In
order to identify your device in case of claim we need
the serial No., product No. and year of production. All
this data can be found on the type label. Please enter
it here for future reference:
Serial No.:
Art. No:
Year of production:
EC-Declaration of Conformity
GÜDE GmbH & Co. KG
birkichstrasse 6, 74549 wolpertshausen
Deutschland
we, hereby declare the conception and construction
of the below mentioned appliances correspond - at
the type of construction being launched - to appro-
priate basic safety and hygienic requirements of EC
Directives. In case of any change to the appliance not
discussed with us the Declaration expires.
Circular table saw
GTKS 1800 Pro
appropriate EU Directives
2006/42/EG, 2004/108/EG
Harmonised standards used
EN 61029-1: 2009+A11
EN 61029-2-1: 2010
EN 55014-1: 2006+A1
EN 55014-2: 1997+A1+A2
EN 61000-3-2: 2006+A1+A2
EN 61000-3-11: 2000
wolpertshausen, 2011-07-22
Technical documentation
no. Bm 50203315 0001
TÜV Rheinland LGA Products GmbH
Tillystraße 2, 90431 Nürnberg
Deutschland
Id. No. 0197
EnGLISH
Helmut Arnold
Managing Director
joachim bürkle
25
Publicité
Table des Matières
