Automatic Accumulation - Adam Equipment GBK Série Mode D'emploi

EN
10.9.2

AUTOMATIC ACCUMULATION

When the scale has been set to Automatic Accumulation the value is stored in
memory automatically.
• Place a weight on the platform. The beeper will sound when the scale is
stable indicating the value is accepted. Remove the weight.
• The display will show "ACC 1" and then the total in the memory before it
returns to zero. Adding a 2nd weight will repeat the process.
• While the weight is on the platform, press the [Print] key to view the
values- first the accumulation number "ACC x" and then the total will be
shown.
NOTE:
1. The scale will not show the value when a weight is removed.
2. In all cases the display must return to zero or a negative number,
before another sample can be added to the memory.
3. More products can be added and [Print] be pressed again for up to
99 entries until the capacity of display is exceeded.
© Adam Equipment Company 2011 32 3056610542RevD-Aug11