Installation; Unpacking; Locating - Adam Equipment GBK Série Mode D'emploi

EN
3.

INSTALLATION

3.1.

UNPACKING

The GBK/GFK scales have already been adjusted to work with a platform and have
been configured for this application.
calibrated as a pair and must be used together .
3.2.

LOCATING

© Adam Equipment Company 2011
The platform and indicator have been
•
The scales should not be placed in a location that will
reduce the accuracy.
•
Avoid extremes of temperature. Do not place in direct
sunlight or near air conditioning vents.
•
Avoid unsuitable tables. The table or floor must be rigid
and not vibrate.
•
Avoid unstable power sources. Do not use near large
users of electricity such as welding equipment or large
motors.
•
Do not place near vibrating machinery.
•
Avoid high humidity that might cause condensation.
Avoid direct contact with water. Do not spray or
immerse the scales in water.
•
Avoid air movement such as from fans or opening doors.
Do not place near open windows or air-conditioning
vents.
•
Keep the scales clean. Do not stack material on the
scales when they are not in use.
8 3056610542RevD-Aug11