Marshall 1962 BLUESBREAKER Manuel Du Propriétaire page 15

TREBLE
4 6
8 2 8
0 10
7
EQ control can change the way that the
other controls behave – experiment to find
your sound.
8. HIGH TREBLE - LOUDNESS 1
Controls the overall output level of
Channel 1.
Tonal Note: This channel is voiced for a
higher treble response than Channel 2.
9. NORMAL - LOUDNESS 2
Controls the overall output level of
Channel 2.
Tonal Note: Channel 2 is voiced for normal
response.
10. INPUT
1 (Top)
Connects the guitar to Channel 1.
1 (Bottom)
Connects the guitar to the lower
sensitivity input on Channel 1.
2 (Top)
Connects the guitar to Channel 2.
2 (Bottom)
Connects the guitar to the lower
sensitivity input on Channel 2.
HIGH TREBLE NORMAL
4 6 4
2 8 2
0 10 0
LOUDNESS 1 LOUDNESS 2
8
1
6
8
1
10
9
Tonal Note: Although the top input of
channel 1 is the input that most guitarists
use, don't be afraid to experiment. Some
guitar players prefer to mix the two
channels together by connecting a short,
screened patch lead between the bottom
input of Channel 1 and the top input of
Channel 2. If you then plug your guitar into
the top input of Channel 1, you can mix
the different tonal characteristics of each
channel for greater flexibility (See diagram).
1
1
ENGLISH
2
INPUTS
2
10
INPUTS
JTM
45
2
2